Showing 145–156 of 193 results
New
RJ45 Panel Mount Jack to RJ45 Plug Cable 300mm (
RJ45 panel mount jack to RJ45 plug cable 300mm for Ethernet and panel interface applications, designed with a straight-through 8P8C connection, shielded CAT5e cable structure, and
SATA 22P Right Angle SMT Receptacle (7+15) – DW-SAT-S22575
SATA 22P Right Angle SMT Receptacle DW-SAT-S22575-XXXX-01 (22 pins: 7 signal + 15 power) for board-level storage interfaces. Highlights: 22-pin SATA (7+15) in right-angle SMT
SATA 22P Right Angle SMT Receptacle 1.27 mm (DW-SAT-S22501)
SATA 22P Right Angle SMT Receptacle 1.27 mm (7 signal + 15 power) designed for storage interfaces on compact boards. It features a right-angle, top-mount SMT configuration with
SFP Cage Assembly with AOC Port and Stop Gear – High-Reliability
The SFP cage assembly with AOC port and stop gear is a 1x1 matte nickel-plated zinc housing that integrates a PEI1010 AOC port, TPV/SUS304 pull link and zinc stop gear to provide
SFP Cage Assembly with Push-Pull Lock and Rubber Seal – High-Reliability
The SFP cage assembly with push-pull lock and rubber seal is a compact 1x1 SFP+ housing that pairs a matte nickel-plated zinc cage with a spring-loaded push-pull mechanism and PE
SFP+ Cage 1×1 – High-Speed Thru-Hole, EMI-Shielded, with Light Pipe
A rugged single-port SFP+ Cage 1x1 – High-Speed Thru-Hole, EMI-Shielded, with Light Pipe and full-nickel shielding. Through-hole pegs and board locks secure the cage to 3.0-mm
SFP+ Cage Assembly with Compression Ring and Release Plate – High-Reliability
SFP+ Cage Assembly with Compression Ring and Release Plate – High-Reliability housing that combines a matte nickel-plated zinc cage, aluminum compression ring, SUS304 release
SFP+ Cage Assembly with MPO Port and Pull Link – High-Performance
The SFP+ cage assembly with MPO port and pull link is a 1x1 zinc-based SFP+ housing that combines a matte nickel EMI shield, precision PEI1010 MPO port and TPV/SUS304 pull-link to
SFP+ Cage Assembly with Pull Link & Seal
The SFP+ cage assembly with pull link and seal is a fully equipped 1x1 SFP+ cage solution featuring a zinc EMI-shielded housing, compression rings, POM pull-link and PE rubber
SFP+ Cage Kit with Pull Link and TPU Sleeve – High-Reliability
Product Short Description The SFP+ cage kit with pull link and TPU sleeve is a compact, matte nickel-plated single-port SFP+ cage assembly that combines a spring-loaded
SIM Card Holder Push-Pull SMT 8P 2.8 mm (DW-SM-62802)
SIM Card Holder Push-Pull SMT 8P 2.8 mm DW-SM-62802-XXTR-01 This is a top-mount SMT SIM card holder designed for compact devices. It features a push-pull mechanism with sliding
