Introduction
Designing dense handheld boards? The Micro USB B Type 5P Female Connector combines SMT + DIP mounting with a 7.2mm width to save space while improving mechanical retention. Model DW-MCB-CB591-01TR-01 is a Micro USB interface optimized for reliability in phones, wearables, portable medical instruments, GPS units, and power banks. Rated 1A 30V with a minimum 10,000 cycles mating life, it brings proven endurance to products that get plugged and unplugged every day.
What this connector is (and why it matters)
This 5P interface is a Micro USB B Type receptacle engineered as a SMT + DIP hybrid: surface-mount gull-wing leads for efficient reflow, plus through-board anchor tabs that resist peel and push-pull stress. The compact shell delivers a finished 7.2mm width and a low profile suitable for thin housings. Reinforced shell grounding tabs tie the stainless shield to PCB ground, controlling EMI while adding retention strength critical for mobile drop tests and flex events.
Key benefits at a glance
- SMT + DIP hybrid type enhances mechanical stability
- 7.2mm width for tight layouts and stacked boards
- 10,000 cycles durability for long service life
- Electrical rating 1A 30V; withstanding 100V AC
- Reinforced shell grounding for secure PCB retention and lower emissions
Construction & materials (signal integrity and longevity)
- Housing: LCP UL94V-0, black—high heat deflection, precise wall thickness, stable during reflow.
- Contacts: Copper alloy (C2680R-H, t=0.20 mm) with selectable 3µ”/5µ”/15µ”/30µ” gold on the mating area over Ni 50µ” overall. The gold stack lowers wear and contact resistance, supporting 10,000 cycles.
- Shell: SUS304 stainless, Nickel plating (≥120µ”) for corrosion resistance, rigid shielding, and reliable frame ground.
Mechanical & electrical performance
- Mating force: ≤35 N max; Unmating force: ≥10 N initial (8–25 N after 1,000 cycles)
- Durability: 10,000 cycles min (contact resistance ≤30 mΩ initial, ≤40 mΩ after test)
- Current/Voltage: 1.0 A, 30 V max; Withstanding voltage: 100 V AC
- Operating temperature: −30 °C to +80 °C
- Contact pitch: 0.65 mm (5 positions)
- Recommended PCB layout includes robust anchor pads and keep-outs to ensure solder fillets around the shell legs for Reinforced shell grounding.
Layout & assembly tips (SMT + DIP made easy)
- Stencil & paste: Use a 0.10–0.12 mm stencil; window-pane the anchor pads to prevent float during reflow.
- Reflow then wave/selective: Reflow the SMT pads first; follow with selective solder or a brief wave for the DIP anchors if your line supports it.
- Ground stitching: Place multiple vias near the shell tabs to lower impedance for Reinforced shell grounding and reduce ESD snapback.
- Keepouts: Respect the sweep of the plug tongue and allow connector-shell clearance around the front edge for cosmetic fit.
- Reliability: For rugged handheld devices and portable medical equipment, consider a mid-board stiffener or bracket if the enclosure imposes side loads.
Where it fits best
- Mobile phones & handheld devices that need thin, robust charging/data ports
- Wearable electronics and sensors where 7.2mm width frees layout routes
- Portable medical equipment, GPS units, and power banks requiring repeatable insertions with 10,000 cycles life
Why choose Dragon Well
Since 2007, Dragon Well has specialized in precision interconnects for high-volume production. High-automation assembly, incoming material control, and 100% visual testing support consistent coplanarity, plating quality, and contact performance. This Micro USB B Type 5P Female Connector is RoHS/REACH compliant and Halogen-Free by design, with material traceability for regulated markets.
Quick selector: highlights
- Micro USB B Type 5P Female Connector
- SMT + DIP hybrid, compact 7.2mm width
- 1A 30V rating; 100V AC withstand
- 10,000 cycles durability; low contact resistance
- LCP UL94V-0 housing; stainless shell with Nickel plating
- Reinforced shell grounding tabs for retention + EMI control
Call to Action — Request Samples / RFQ
- Dragon Well HQ: cndragonwell.com
- DW-TEK site: dw-tek.com
Connect with us
- LinkedIn: Dragon Well Electronics Co., Ltd
- Instagram: @dragonwell_electronics
- Facebook: Dragon Well Electronics
