Showing 13–24 of 136 results
1.27 mm Dual-Row SMT Pin Header, Vertical, Base 1.0 mm (DW-PH-2127298WVnP)
1.27 mm Dual-Row SMT Pin Header, Vertical, Base 1.0 mm It features a vertical (top-entry) orientation with surface-mount terminals and a 1.0mm standoff/base for solder-paste
Pin Headers and Socket Headers, Pin Header (PCB Header), Socket Header (PCB Receptacles), Socket Header SMT Type
1.27mm Dual Row SMT Female Header 4.3mm Base
The 1.27mm dual row SMT female header 4.3mm base height is a fine-pitch, low-profile receptacle with gold-over-nickel phosphor bronze contacts and PA9T UL94V-0 housing, rated 1.0A
Pin Headers and Socket Headers, Pin Header (PCB Header), Socket Header (PCB Receptacles), Socket Header SMT Type
1.27mm Dual Row SMT Pin Header with Post, Base 6.5H
1.27mm dual row SMT pin header with post is a fine-pitch board-to-board connector designed for dense signal routing in modern electronic assemblies. This 1.27mm dual row SMT pin
Pin Headers and Socket Headers, Pin Header (PCB Header), Socket Header (PCB Receptacles), Socket Header SMT Type
1.27mm Female Header Dual Rows SMT Type Base 4.3H with Cap
The 1.27mm female header dual rows SMT type base 4-3H with cap is a 1.27mm pitch dual-row SMT socket featuring phosphor-bronze gold-over-nickel contacts, PA6T UL94V-0 housing and
1.27mm Pin Header Dual Rows SMT Type Base 2.0H with Cap
1.27mm Pin Header Dual Rows SMT Type Base 2.0H with Cap is a dual-row brass SMT header on 1.27mm pitch, featuring Ni/Au-plated 0.40mm posts, PA6T UL94V-0 housing and 2A per pin
1.27mm Right Angle SMT Pin Header – High-Density
The 1.27mm right angle SMT pin header is a low-profile, dual-row connector optimized for dense board stacking, offering 2A per pin, gold-plated brass contacts and a UL94V-0 LCP
1.27mm SMT Dual Row Pin Header 1.00H
1.27mm SMT dual row pin header 1.00H is built for fine-pitch board-to-board connections where space is tight and solder joint stability matters. The drawing specifies SQ0.4 ±0.02
1.50 mm 3-Circuit Wire-to-Board Pigtail Cable (DW-CABPH150-3P000048528)
1.50 mm 3-Circuit Wire-to-Board Pigtail Cable (DW-CABPH150-3P000048528) designed for compact device interconnects. It features a 3-circuit crimp housing at P1 and open, tinned
1.8mm vertical THT wafer header – Robust Crimp-Style, Single-Row
1.8mm vertical THT wafer header — a single-row, crimp-style through-hole connector for matching housings. It uses two signal pins with molded board-locks/polarizing bosses for
1×1 SFP+ Cage Kit with Blue Pull-Link
1×1 SFP+ Cage Kit with Blue TPV Pull-Link - Designed with a durable TPV pull-link in blue for fast identification and easy hot-swap handling the unit supports effortless
10/100Base-T Magnetic RJ45 Jack 1×1 Port Shielded With EMI & LED Tab-Down THT R/A 8P8C
10/100Base-T Magnetic RJ45 Jack delivers high performance and durability in a compact package. This single-port connector is built with Through-Hole Technology (THT) for a strong
