Showing 37–48 of 243 results
1.27mm Pin Header Dual Rows SMT Type Base 2.0H with Cap
1.27mm Pin Header Dual Rows SMT Type Base 2.0H with Cap is a dual-row brass SMT header on 1.27mm pitch, featuring Ni/Au-plated 0.40mm posts, PA6T UL94V-0 housing and 2A per pin
1.27mm Right Angle Female Header 10P
The 1.27mm right angle female header DW-FH-1127663WR10P-01PE-01 is a 10-position, single-row, 90° through-hole receptacle connector with a 1.27 mm pitch. It features a 1 A
1.27mm Right Angle SMT Pin Header – High-Density
The 1.27mm right angle SMT pin header is a low-profile, dual-row connector optimized for dense board stacking, offering 2A per pin, gold-plated brass contacts and a UL94V-0 LCP
1.27mm SMT Dual Row Pin Header 1.00H
1.27mm SMT dual row pin header 1.00H is built for fine-pitch board-to-board connections where space is tight and solder joint stability matters. The drawing specifies SQ0.4 ±0.02
1.50 mm 3-Circuit Wire-to-Board Pigtail Cable (DW-CABPH150-3P000048528)
1.50 mm 3-Circuit Wire-to-Board Pigtail Cable (DW-CABPH150-3P000048528) designed for compact device interconnects. It features a 3-circuit crimp housing at P1 and open, tinned
1.8mm vertical THT wafer header – Robust Crimp-Style, Single-Row
1.8mm vertical THT wafer header — a single-row, crimp-style through-hole connector for matching housings. It uses two signal pins with molded board-locks/polarizing bosses for
10/100Base-T Magnetic RJ45 Jack 1×1 Port Shielded With EMI & LED Tab-Down THT R/A 8P8C
10/100Base-T Magnetic RJ45 Jack delivers high performance and durability in a compact package. This single-port connector is built with Through-Hole Technology (THT) for a strong
1×1 SFP+ Cage Kit with Barrel Sleeve Lock – High-Performance
The 1x1 SFP+ cage kit with barrel sleeve lock is a rugged single-port cage assembly featuring a PC barrel sleeve, dual pull-link spring latch and matte nickel zinc housing,
1×1 SFP+ Cage Kit with Black Pull-Link EMI-Shielded, Thru-Hole, Complete Hardware
Compact 1×1 SFP+ cage kit featuring a black pull-link for quick, positive transceiver handling. Zinc-alloy cage hardware delivers strong EMI shielding; SUS304 springs and screws
1×1 SFP+ Cage Kit with Dual Pull-Link Lock
The 1x1 SFP+ cage kit with dual pull-link lock is a rugged single-port SFP+ cage assembly featuring a matte nickel zinc housing, dual stainless-steel pull-links, and PC alignment
1×1 SFP+ Cage Kit with Pull-Link Lock EMI-Shielded, Thru-Hole, Light Pipe Ready
A rugged, single-port SFP+ cage kit with a positive pull-link lock and through-hole mounting for rock-solid retention. Matte-nickel plated zinc and SUS304 deliver durable EMI
