Dragon Well’s 1×1 RJ45 through-hole jack features eight contacts, a black PA46 UL94V-0 housing, phosphor bronze terminals, and gold-flash plating on the mating areas. Designed for right-angle PCB mounting, this single-port connector supports compatible RJ45 plug connections.
Applications:
Highlights:
1×1 RJ45 through-hole jack (DW-RJ45-D001651-01TP-01-1) is a single-port RJ45 modular connector designed for PCB-mounted Ethernet and communication interfaces. Its eight contacts provide an interface for a compatible RJ45 plug, while the right-angle configuration allows the connector to be mounted along the edge or side of a printed circuit board.
The connector features a black PA46 housing with a UL94V-0 flammability rating. Its terminals are made of phosphor bronze with a specified diameter of 0.46mm. The selected part-number configuration identifies gold-flash plating on the mating areas and tray packaging. The drawing is marked RoHS compliant.
1×1 RJ45 through-hole jack can be considered for routers, networking equipment, communication devices, embedded systems, and industrial electronic assemblies requiring a single-port RJ45 interface. Actual Ethernet performance depends on the complete system design, PCB layout, cabling, and validation.
The recommended PCB layout in the engineering drawing should be followed during board design. Before production, verify the mating plug, contact assignment, PCB footprint, and required electrical performance.
| General | |||
| Status | Active | Category | Modular Jack |
| Part Number | DW-RJ45-D001651-XXTP-XX-X | Description | RJ45 1×1 Port P8C, 8P8C, PCB Mount, Optional LED |
| Product Name | RJ45 1×1 Port P8C | Magnetic | No |
| Component Type | PCB Jack | Power over Ethernet (PoE) | N/A |
| Type | Socket | Packaging | Tray Packing (TP) |
| Width | 15.75 ±0.20 mm | Height | 12.90 mm |
| Length | 15.10 ±0.20 mm | Installed Height | 12.70 ±0.20 mm |
| Contact Material | Phosphor Bronze, Ø0.46 mm | Contact Plating | See part-number code: 01 Gold Flash; 03 3 µin Gold; 06 6 µin Gold; 15 15 µin Gold; 30 30 µin Gold on mating area |
| Shield Material | N/A | Shield Plating | N/A |
| Mating Force | N/A | Retention Strength | N/A |
| Customs Tariff Number | N/A | Country of Origin | N/A |
| Electrical | |||
| Current – Maximum per Contact | 1.5 A (rated current; per-contact basis not explicitly stated) | Grounding to Panel | N/A |
| Grounding to PCB | N/A | Shielded | No |
| Voltage – Maximum | 125 V AC RMS | Operating Temperature | 0°C to +70°C |
| Contact Resistance (Max) | 50 mΩ Max. | Storage Temperature | -40°C to +85°C |
| Insulation Resistance (Min) | 500 MΩ Min. at 500 V DC | EMI | N/A |
| Dielectric Withstanding Voltage | 1000 V AC RMS, 50 Hz, 1 minute | Lead-Free Process Capability | N/A |
| Physical | |||
| Color – Housing | Selectable by part-number code: 1 Black; 2 Yellow; 3 Red; 4 Green; 5 Blue; 6 White | Orientation | Side Entry, Right Angle |
| Positions / Loaded Contacts | 8P8C | Lightpipes / LEDs | Optional LED |
| Port Configuration | 1×1 | Termination Interface | DIP / THT |
| Durability (mating cycles min) | 750 Cycles Min. | Inverted / Top Latch | N/A |
| Jack Height | 12.90 mm | Latch / Tab Orientation | N/A |
| Material – Resin | PA46, UL94V-0 (base specification); part-number options also list PA66 and PBT | Material – Metal | Phosphor Bronze, Ø0.46 mm (terminals) |
| PCB Retention | N/A | Pitch – Mating Interface | N/A |
| Pitch – Termination Interface | 2.04 mm / 1.02 mm staggered terminal spacing | PCB Thickness – Recommended | N/A |
| Recommended PCB Layout | 8 × Ø0.90 mm terminal holes; 2 × Ø3.20 mm mounting holes; layout tolerance ±0.05 mm | Additional PCB Holes | 2 × Ø3.20 mm mounting holes |
| Net Weight | N/A | RoHS | Yes |
